Drones & UAV

    • Aircraft Fundamentals

      $0.00
      About this course

      This is a multidisciplinary course where you will study aerodynamics, principal components, and aircraft control surfaces. By enrolling on this program, participants understand the basics of Aerospace Engineering and identify an Aircraft’s parts and their purposes. The objective of the course is to know how Airplanes fly, the key components and how the control surfaces are used to manoeuvre the aircraft and finally fly a virtual plane.

      Duration: 60 minutes

      What you will learn
      • Introduction
      • Aircraft and its main components
      • Thrust, Lift and Drag, Newton’s 3rd Law and Bernoulli
      • Control Surfaces of an Aircraft and Maneuvers
      • Fly a virtual Aircraft
    • Introduction to Drone

      $29.00 $14.00
      About this course

      Learn important aspects of drones, the science behind how a drone flies, and drones’ basic components.

      By joining this course you will get access to our one-hour live session, Drone in Schools learning portal, discussion forum and much more. Our specially designed drone simulator will help you understand common acronyms related to drones and different movements like pitch, roll, and yaw.

      What you will learn
      • What are Drones?
      • Understand the science behind how a drone flies
      • Components of Drone and the flying terminology
      Please select your Region, Date & Time slot
    • Jr. Drone Designer

      $49.00 $29.00
      About this course

      This program aims to learn about drones and design a drone frame using Autodesk Tinkercad software. By enrolling in this program, participants can learn about drones, different design types, how a drone fly, an overview of 3D printing, and how to use Tinkercad to design a drone. This course will be focused on the multirotor drone, and by the end of the session, participants learn how to work on Tinkercad software and learn to design a drone.

       

      What you will learn
      • Overview to drone and 3D printing
      • Understand the science behind how a drone fly
      • Designing a Drone Frame using Tinkercad
    • Jr. Aircraft Designer

      $59.00 $39.00
      About this course

      This is a basics course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Tinkercad software. By enrolling to this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on Tinkercad software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview to aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Tinkercad
    • Jr. Spacecraft Designer

      $59.00 $39.00
      About this course

      Understand the Space Environment and the science behind how a Spacecraft is launched and design a Spacecraft using Autodesk Tinkercad software. By enrolling on this program participants can learn the basics of rocket science, learn the components of the Spacecraft, understand the flight path and be able to design a Lunar lander. This course will be concentrated on human Spacecraft and at the end of the session, participants will learn to design a Lunar lander using Tinkercad.

       

      What you will learn
      • Overview to the space environment and 3D printing
      • Understand the science behind how a Spacecraft is launched
      • Designing a Lunar lander using Tinkercad
    • DIY Drone

      $99.00 $49.00
      Product Specification

      Power: Battery
      Function: Headless mode, One Key Takeoff / Landing, With Remote Control
      Type: Remote Control
      Certificate: EN71, ASTM, EN62115, HR4040, 7P, FCC
      Package Size: 29.5 x 17.5 x 8 cm
      Weight: 1.395 kg

    • Drone Design Challenge

      $99.00 $49.00
      About this challenge

      This program is to learn to design a drone frame using Tinkercad and to 3D print.

      By enrolling in this program, participants will learn important aspects of drones, the basic components of drones, different drone design types, an overview of 3D printing, and how to use Tinkercad for designing. At the end of the session, participants will access Autodesk software Tinkercad and learn to design a drone.

      What you will learn
      • Overview to drone and 3D printing
      • Designing a quadcopter drone using Tinkercad
      Please select your Region, Date & Time slot
    • Sr. Drone Designer

      $69.00 $49.00
      About this course

      This program aims to learn about drones and design a drone frame using Autodesk Fusion 360 software. By enrolling in this program, participants can learn about drones, different design types, how a drone fly, an overview of 3D printing, and how to use Fusion 360 to design a drone. This course will be focused on the multirotor drone, and by the end of the session, participants learn how to work on Autodesk software and learn to design a drone.

       

      What you will learn
      • Overview to drone and 3D printing
      • Understand the science behind how a drone fly
      • Designing a Drone Frame using Fusion 360
    • Sr. Aircraft Designer

      $79.00 $59.00
      About this course

      This is a basics course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Fusion 360 software. By enrolling to this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on fusion 360 software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview to aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Fusion 360
    • Sr. Spacecraft Designer

      $79.00 $59.00
      About this course

      Understand the Space Environment and the science behind how a Spacecraft is launched and design a Spacecraft using Autodesk Fusion 360 software. By enrolling on this program participants can learn the basics of rocket science, learn the components of the Spacecraft, understand the flight path and be able to design a Lunar lander. This course will be concentrated on human Spacecraft missions and at the end of the session, participants will learn to design a Lunar lander using Fusion 360.

       

      What you will learn
      • Overview to the space environment and 3D printing
      • Understand the science behind how a Spacecraft is launched
      • Designing a Lunar lander using Fusion 360
    • Learn Drone Coding

      $149.00 $69.00
      About this course

      Gain foundational knowledge in drone coding using Block programming

      In this program, participants will learn important aspects of drones, different terminologies used in drone flying and the fundamentals of coding. Participants will use a specially built drone simulator to fly the drone using Block Programming. This course will introduce and familiarize you with drone flying terminology and Learn to fly a drone using block programming.

      What you will learn
      • Learn the basic drone manoeuvres and controls
      • Test different program using a drone simulator

       

      Please select your Region, Date & Time slot
    • Drone Designing – Fusion 360

      $69.00
      About this course

      Learn important aspects of drones, the science behind how a drone flies and the basic components of drones.

      By joining this course you will get access to our one-hour live session, Drone in Schools learning portal, discussion forum and much more. Our specially designed drone simulator will help you understand common acronyms related to drones and different movements like pitch, roll, and yaw.

      What you will learn
      • What are Drones?
      • Understand the science behind how a drone flies
      • Components of Drone and the flying terminology

    Start typing and press Enter to search

    Shopping Cart

    No products in the cart.