Drones & UAV

    • Jr. Aircraft Designer

      $59.00 $39.00
      About this course

      This is an aircraft designing program for primary students, that focuses on introducing the basic concepts of aerospace engineering and learning how to use Autodesk Tinkercad software to design a multirotor aircraft.

      By enrolling on the program participants will learn about different types of aircraft, the basic components of an aircraft, such as wings, fuselage, and engines and how all these components work together to fly the aircraft.

      This program helps participants gain an appreciation for the science and engineering behind flight and learn how to create a 3D model of a multirotor aircraft using Autodesk Tinkercad software.

       

      What you will learn
      • Overview of aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Tinkercad
    • Drone Design Challenge

      $99.00 $49.00
      About this challenge

      This program is to learn to design a drone frame using Tinkercad and to 3D print.

      By enrolling in this program, participants will learn important aspects of drones, the basic components of drones, different drone design types, an overview of 3D printing, and how to use Tinkercad for designing. At the end of the session, participants will access Autodesk software Tinkercad and learn to design a drone.

      What you will learn
      • Overview to drone and 3D printing
      • Designing a quadcopter drone using Tinkercad
      Please select your Region, Date & Time slot
    • Sr. Aircraft Designer

      $79.00 $49.00
      About this course

      This is an aircraft designing program for secondary students, where participants will learn a wide range of skills and concepts related to the field of aerospace engineering. The program introduces participants to different types of aircraft, the science behind how it flies and finally designs an aircraft using Autodesk Fusion 360 software.

      By enrolling in this program participants will learn about the fundamental principles of aerodynamics, including lift, drag, thrust, and weight. They will learn how these forces interact to allow an aircraft to fly and how they can be manipulated to achieve different flight characteristics.

      This course is concentrated on rotor aircraft and the key design features. At the end of the session, participants learn about the process of designing an aircraft, including creating 2D and 3D models using fusion 360 software.

       

      What you will learn
      • Overview of aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Fusion 360
    • Simulator Pilot Training

      $199.00 $124.00
      About this course

      This course teaches you everything you need to know to fly a Cessna 182 Skylane. You will get pilot training to fly the latest Cessna 182 Skylane with state of the art Avionics on a flight simulator guided by an experienced pilot. By enrolling in this program, participants learn the basics of Aerodynamic Forces, aircraft structure, control surfaces, flight instruments, and a 3 hr of flying training. When you enrol for the program, you get a flight simulator joystick and one year of access to the DIS flight simulator to learn flying.

       

      What you will learn
      • Pilot training to fly Cessna 182 Skylane
      • Aerodynamic Forces, aircraft structure, control surfaces, and flight instruments
      • Flying training on DIS flight simulator
    • Jr. Drone Designer

      $59.00 $39.00
      About this course

      This program aims to learn about drones and design a drone frame using Autodesk Tinkercad software. By enrolling in this program, participants can learn about drones, different design types, how a drone fly, an overview of 3D printing, and how to use Tinkercad to design a drone. This course will be focused on the multirotor drone, and by the end of the session, participants learn how to work on Tinkercad software and learn to design a drone.

       

      What you will learn
      • Overview to drone and 3D printing
      • Understand the science behind how a drone fly
      • Designing a Drone Frame using Tinkercad
    • Teens Next Big Idea

      $149.00 $99.00
      About this challenge

      This program is intended to teach students how to build a drone from scratch.

      This will start with an overview of the electronic components used in Drones. It will also deep dive into Electromechanical Devices like the Drone Motors, ESC and power source used in drones. It will further take you to explore the Flight controllers (FC) and the different types of FC available in the market. Then will introduce you to add-ons like sensors, Gyroscope, GPS, sensors, camera, transmission system, autonomous processing units, and LIDAR.

      At the end of the session, students will be able to choose all the required components to build a Drone with confidence and build the drone.

      What you will learn
      • Understand the components needed to build a quadcopter drone.
      • Build a quadcopter drone from scratch.
      Please select your Region, Date & Time slot
    • Sr. Drone Designer

      $79.00 $49.00
      About this course

      This program aims to learn about drones and design a drone frame using Autodesk Fusion 360 software. By enrolling in this program, participants can learn about drones, different design types, how a drone fly, an overview of 3D printing, and how to use Fusion 360 to design a drone. This course will be focused on the multirotor drone, and by the end of the session, participants learn how to work on Autodesk software and learn to design a drone.

       

      What you will learn
      • Overview to drone and 3D printing
      • Understand the science behind how a drone fly
      • Designing a Drone Frame using Fusion 360
    • Jr. Aircraft Designer (TWS- Jebel Ali)

      $59.00 $39.00
      About this course

      This is a basic course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Tinkercad software. By enrolling on this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on Tinkercad software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview of aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Tinkercad

       

       

      *This course is exclusive to the students of The Winchester school – Jebel Ali   

       

    • DIY Drone

      $99.00 $1.00
      Product Specification

      Power: Battery
      Function: Headless mode, One Key Takeoff / Landing, With Remote Control
      Type: Remote Control
      Certificate: EN71, ASTM, EN62115, HR4040, 7P, FCC
      Package Size: 29.5 x 17.5 x 8 cm
      Weight: 1.395 kg

    • Learn to Build a Drone

      $199.00 $99.00
      About this course

      Learn about drones by assembling a DIY Drone.

      This course will help you understand drones and its components by assembling a DIY Drone. Each participant gets a DIY drone kit, and the trainer will take the students through a step-by-step process through which the drone is build and ready to fly. During this process, students will learn about their mechanical and electronic components and how they interact with motors, flight controllers, batteries and chargers, receivers and transmitters and more. By the end of the course, you will have an overall idea about different components of the drone.

      What you will learn
      • Learn the Components of drone
      • Assemble your own drone and fly
      Please select your Region, Date & Time slot
    • Sr. Aircraft Designer (TWS- Jebel Ali)

      $79.00 $49.00
      About this course

      This is a basic course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Fusion 360 software. By enrolling on this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on fusion 360 software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview to aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Fusion 360

       

      *This course is exclusive to the students of The Winchester school – Jebel Ali   

    • Build a Drone – Advance

      $149.00 $99.00
      About this challenge

      This program is intended to teach students how to build a drone from scratch.

      This will start with an overview of the electronic components used in Drones. It will also deep dive into Electromechanical Devices like the Drone Motors, ESC and power source used in drones. It will further take you to explore the Flight controllers (FC) and the different types of FC available in the market. Then will introduce you to add-ons like sensors, Gyroscope, GPS, sensors, camera, transmission system, autonomous processing units, and LIDAR.

      At the end of the session, students will be able to choose all the required components to build a Drone with confidence and build the drone.

      What you will learn
      • Understand the components needed to build a quadcopter drone.
      • Build a quadcopter drone from scratch
      Please select your Region, Date & Time slot

    Start typing and press Enter to search

    Shopping Cart

    No products in the cart.