Drones & UAV

    • Aircraft Fundamentals

      $0.00
      About this course

      This is a multidisciplinary course where you will study aerodynamics, principal components, and aircraft control surfaces. By enrolling on this program, participants understand the basics of Aerospace Engineering and identify an Aircraft’s parts and their purposes. The objective of the course is to know how Airplanes fly, the key components and how the control surfaces are used to manoeuvre the aircraft and finally fly a virtual plane.

      Duration: 60 minutes

      What you will learn
      • Introduction
      • Aircraft and its main components
      • Thrust, Lift and Drag, Newton’s 3rd Law and Bernoulli
      • Control Surfaces of an Aircraft and Maneuvers
      • Fly a virtual Aircraft
    • Drone Design Challenge

      $99.00 $49.00
      About this challenge

      This program is to learn to design a drone frame using Tinkercad and to 3D print.

      By enrolling in this program, participants will learn important aspects of drones, the basic components of drones, different drone design types, an overview of 3D printing, and how to use Tinkercad for designing. At the end of the session, participants will access Autodesk software Tinkercad and learn to design a drone.

      What you will learn
      • Overview to drone and 3D printing
      • Designing a quadcopter drone using Tinkercad
      Please select your Region, Date & Time slot
    • Teens Next Big Idea

      $149.00 $99.00
      About this challenge

      This program is intended to teach students how to build a drone from scratch.

      This will start with an overview of the electronic components used in Drones. It will also deep dive into Electromechanical Devices like the Drone Motors, ESC and power source used in drones. It will further take you to explore the Flight controllers (FC) and the different types of FC available in the market. Then will introduce you to add-ons like sensors, Gyroscope, GPS, sensors, camera, transmission system, autonomous processing units, and LIDAR.

      At the end of the session, students will be able to choose all the required components to build a Drone with confidence and build the drone.

      What you will learn
      • Understand the components needed to build a quadcopter drone.
      • Build a quadcopter drone from scratch.
      Please select your Region, Date & Time slot
    • Pilot Training – Basics

      $199.00 $149.00
      About this course

      This course teaches you everything you need to know to fly a Cessna 172. You will get pilot training to fly the latest Cessna 172 with state of the art Avionics on a flight simulator guided by an experienced pilot. By enrolling on this program participants learn the basics of Aerodynamic Forces, aircraft structure, control surfaces, and flight instruments along with a 3 hr of flying training. When you enrol for the program you get a flight simulator joystick and limited access to X plane 11 flight simulator to learn flying

       

      What you will learn
      • Pilot training to fly Cessna 172
      • Aerodynamic Forces, aircraft structure, control surfaces, and flight instruments
      • Flying training on X plane 11 flight simulator
    • Learn to Build a Drone

      $199.00 $99.00
      About this course

      Learn about drones by assembling a DIY Drone.

      This course will help you understand drones and its components by assembling a DIY Drone. Each participant gets a DIY drone kit, and the trainer will take the students through a step-by-step process through which the drone is build and ready to fly. During this process, students will learn about their mechanical and electronic components and how they interact with motors, flight controllers, batteries and chargers, receivers and transmitters and more. By the end of the course, you will have an overall idea about different components of the drone.

      What you will learn
      • Learn the Components of drone
      • Assemble your own drone and fly
      Please select your Region, Date & Time slot
    • DIY Drone

      $99.00 $49.00
      Product Specification

      Power: Battery
      Function: Headless mode, One Key Takeoff / Landing, With Remote Control
      Type: Remote Control
      Certificate: EN71, ASTM, EN62115, HR4040, 7P, FCC
      Package Size: 29.5 x 17.5 x 8 cm
      Weight: 1.395 kg

    • Build a Drone – Advance

      $149.00 $99.00
      About this challenge

      This program is intended to teach students how to build a drone from scratch.

      This will start with an overview of the electronic components used in Drones. It will also deep dive into Electromechanical Devices like the Drone Motors, ESC and power source used in drones. It will further take you to explore the Flight controllers (FC) and the different types of FC available in the market. Then will introduce you to add-ons like sensors, Gyroscope, GPS, sensors, camera, transmission system, autonomous processing units, and LIDAR.

      At the end of the session, students will be able to choose all the required components to build a Drone with confidence and build the drone.

      What you will learn
      • Understand the components needed to build a quadcopter drone.
      • Build a quadcopter drone from scratch
      Please select your Region, Date & Time slot
    • Learn Drone Coding

      $149.00 $69.00
      About this course

      Gain foundational knowledge in drone coding using Block programming

      In this program, participants will learn important aspects of drones, different terminologies used in drone flying and the fundamentals of coding. Participants will use a specially built drone simulator to fly the drone using Block Programming. This course will introduce and familiarize you with drone flying terminology and Learn to fly a drone using block programming.

      What you will learn
      • Learn the basic drone manoeuvres and controls
      • Test different program using a drone simulator

       

      Please select your Region, Date & Time slot
    • Sr. Spacecraft Designer

      $79.00 $59.00
      About this course

      Understand the Space Environment and the science behind how a Spacecraft is launched and design a Spacecraft using Autodesk Fusion 360 software. By enrolling on this program participants can learn the basics of rocket science, learn the components of the Spacecraft, understand the flight path and be able to design a Lunar lander. This course will be concentrated on human Spacecraft missions and at the end of the session, participants will learn to design a Lunar lander using Fusion 360.

       

      What you will learn
      • Overview to the space environment and 3D printing
      • Understand the science behind how a Spacecraft is launched
      • Designing a Lunar lander using Fusion 360
    • Jr. Spacecraft Designer

      $59.00 $39.00
      About this course

      Understand the Space Environment and the science behind how a Spacecraft is launched and design a Spacecraft using Autodesk Tinkercad software. By enrolling on this program participants can learn the basics of rocket science, learn the components of the Spacecraft, understand the flight path and be able to design a Lunar lander. This course will be concentrated on human Spacecraft and at the end of the session, participants will learn to design a Lunar lander using Tinkercad.

       

      What you will learn
      • Overview to the space environment and 3D printing
      • Understand the science behind how a Spacecraft is launched
      • Designing a Lunar lander using Tinkercad
    • Sr. Aircraft Designer

      $79.00 $59.00
      About this course

      This is a basics course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Fusion 360 software. By enrolling to this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on fusion 360 software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview to aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Fusion 360
    • Jr. Aircraft Designer

      $59.00 $39.00
      About this course

      This is a basics course in aircraft designing where you will study different types of aircraft, how an aircraft flies and design an aircraft using Autodesk Tinkercad software. By enrolling to this program participants will learn about control surfaces and how it is used to manoeuvre an aircraft, learn and understand different components of aircraft and how all these components work together to fly the aircraft.

      This course is concentrated on propeller aircraft and the key design features. At the end of the session, participants learn how to work on Tinkercad software and learn to design an airframe for a propeller aircraft.

       

      What you will learn
      • Overview to aircraft and 3D printing
      • Understand the science behind how an aircraft fly
      • Designing an Airframe using Tinkercad

    Start typing and press Enter to search